Bonjour,
Alors voilà, j'ai un vieux PC sur lequel j'ai installé Debian et j'aimerais pouvoir l'allumer à distance.
Donc je me suis renseigné et j'ai vu qu'il fallait le Wake On Lan, et j'essaye donc de le faire fonctionner déjà en local.
J'ai lu plusieurs tutoriels et articles là dessus ou il y avait plusieurs astuces / méthodes mais en vain, je n'arrive toujours pas à allumer mon ordinateur à distance depuis un autre ordinateur du réseau local.
Le problème, c'est que je ne sais pas exactement dans quelles proportions mon matériel est compatible car :
sous debian, avec la commande ethtool, j'ai bien le "Supports Wake-on" pour chacun des ports ethernet mais sous windows, je n'ai pas d'option pour le WakeOnLan dans les options avancées
donc, comment savoir si les cartes que j'ai sont vraiment compatibles ou pas ?
J'ai essayé avec 3 cartes réseaux et j'ai un port intégré à la carte mère...
Concernant ma carte mère, dans le bios, il y a bien une option WakeOnLan mais est-ce que ce n'est que pour le port intégré à la carte mère ou aussi pour les cartes réseaux connectés en PCI ? Comment le savoir ?
Le port ethernet intégré semble HS... donc je n'ai pas pu tester le WakeOnLan dessus, il ne réagit plus du tout (les diodes ne s'allument pas) lors d'un branchement de cable (sous debian et windows) alors qu'il est détecté dans les périphériques.
Bref, je désespère un peu mais bon si quelqu'un s'y connait bien et a un tout petit peu de temps, je vous remercie d'avance...
Si au moins je savais que ma carte mère est bien compatible mais que c'est juste les cartes réseaux qui ne le sont pas, je pourrais acheter une autre carte réseau compatible, peut etre avec cable WOL ?, bref, je ne sais pas trop, c'est pour ca je cherche à fixer les choses parce que la je ne sais plus trop ou j'en suis et ce qu'il en est vraiment de mon matériel
Si quelqu'un peut m'aider pour regarder avec moi le matériel et en tirez des conclusions...
Voici un début d'infos sur la config d'après mes recherches, mais demandez-moi si vous avez besoin de savoir d'autres infos, si vous savez comment faire.
Merci de votre aide
++
Ordinateur :
Fujitsu Siemens Scaleo 600 AXP20 1 256MB
Carte mère :
Gigabyte
Product name : GA-7VAXFS
doc : http://www.fujitsu-siemens.co.uk/...
Dans le bios > "Power Management Setup" > "ModemRingOn/WakeOnLan" sur [Enabled]
Est-ce qu'il faut une option "réveil par périphérique PCI" ? est-ce que le wakeonlan n'est que pour le port intégré ? comment savoir ?
comment voir s'il y a un emplacement pour brancher une carte avec un fil WOL ? a quoi ca ressemble ?
eth0 :
ethtool -i eth0 : driver : 8139too ; version : 0.9.27
modinfo 8139too : il n'y a aucune options pour le wol
lspci : Ethernet Controller : Realtek Semiconductor
sous windows : pas d'option pour le WakeOnLan dans les options avancées
mais sous debian, avec ethtool, on a le "Supports Wake-on"
commande ethtool :
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 10Mb/s
Duplex: Half
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: no
eth1 :
ethtool -i eth1 : driver : 8139too ; version : 0.9.27
modinfo 8139too : il n'y a aucune options pour le wol
lspci : Ethernet Controller : Realtek Semiconductor
sous windows : pas d'option pour le WakeOnLan dans les options avancées
mais sous debian, avec ethtool, on a le "Supports Wake-on"
commande ethtool :
Settings for eth1:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 10Mb/s
Duplex: Half
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: no
eth2 :
Netgear FA311
Sur les forums de netgear => apparement cette carte ne fait pas Wake On Lan
mais sous Debian, lorsqu'on fait la commande "ethtool", on a bien : "Supports Wake-on : pumbags"
ethtool -i eth2 : driver : natsemi ; version 2.0
modinfo natsemi : il n'y a aucune options pour le wol
lspci : Ethernet Controller : National Semiconductor
sous windows : pas d'option pour le WakeOnLan dans les options avancées
mais sous debian, avec ethtool, on a le "Supports Wake-on"
commande ethtool :
Settings for eth2:
Supported ports: [ TP MII FIBRE ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbags
Wake-on: ubg
SecureOn password: 00:00:00:00:00:00
Current message level: 0x000040c5 (16581)
Link detected: yes
eth3 :
ethtool -i eth3 : driver : 8139too ; version : 0.9.27
modinfo 8139too : il n'y a aucune options pour le wol
lspci : Ethernet Controller : Realtek Semiconductor
sous windows : pas d'option pour le WakeOnLan dans les options avancées
mais sous debian, avec ethtool, on a le "Supports Wake-on"
commande ethtool :
Settings for eth3:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 10Mb/s
Duplex: Half
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: no
=> Commande dmidecode :
# dmidecode 2.8
SMBIOS 2.3 present.
37 structures occupying 1094 bytes.
Table at 0x000F0120.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: Award Software International, Inc.
Version: F7
Release Date: 04/08/2003
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 256 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: Fujitsu Siemens
Product Name: GA-7VAXFS
Version:
Serial Number:
UUID: Not Present
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: GA-7VAXFS
Version:
Serial Number:
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer:
Type: Desktop
Lock: Not Present
Version:
Serial Number:
Asset Tag:
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: Socket A
Type: Central Processor
Family: Athlon
Manufacturer: AMD
ID: 62 06 00 00 FF FB 83 03
Signature: Family 6, Model 6, Stepping 2
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
Version: AMD Athlon(tm) XP
Voltage: 1.8 V
External Clock: 133 MHz
Max Speed: 2800 MHz
Current Speed: 1666 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0009
L2 Cache Handle: 0x000A
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:
Handle 0x0005, DMI type 5, 22 bytes
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: Four-way Interleave
Maximum Memory Module Size: 1024 MB
Maximum Total Memory Size: 3072 MB
Supported Speeds:
70 ns
60 ns
Supported Memory Types:
Standard
EDO
Memory Module Voltage: 5.0 V
Associated Memory Slots: 3
0x0006
0x0007
0x0008
Enabled Error Correcting Capabilities:
None
Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A0
Bank Connections: 0 1
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 256 MB (Double-bank Connection)
Enabled Size: 256 MB (Double-bank Connection)
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A1
Bank Connections: 2 3
Current Speed: 60 ns
Type: Unknown
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A2
Bank Connections: 4 5
Current Speed: 60 ns
Type: Unknown
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x0009, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 KB
Maximum Size: 128 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000A, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 256 KB
Maximum Size: 256 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Reference Designator:
External Connector Type: None
Port Type: Other
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SECONDARY IDE
Internal Connector Type: On Board IDE
External Reference Designator:
External Connector Type: None
Port Type: Other
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FDD
Internal Connector Type: On Board Floppy
External Reference Designator:
External Connector Type: None
Port Type: 8251 FIFO Compatible
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM2
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LPT1
Internal Connector Type: DB-25 female
External Reference Designator:
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Keyboard
Internal Connector Type: Other
External Reference Designator:
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Mouse
Internal Connector Type: PS/2
External Reference Designator: Detected
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0013, DMI type 9, 13 bytes
System Slot Information
Designation: PCI
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 9
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0014, DMI type 9, 13 bytes
System Slot Information
Designation: PCI
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 10
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0015, DMI type 9, 13 bytes
System Slot Information
Designation: PCI
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 11
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0016, DMI type 9, 13 bytes
System Slot Information
Designation: PCI
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 12
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0017, DMI type 9, 13 bytes
System Slot Information
Designation: PCI
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 13
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0018, DMI type 9, 13 bytes
System Slot Information
Designation: AGP
Type: 32-bit AGP
Current Usage: In Use
Length: Long
ID: 8
Characteristics:
5.0 V is provided
Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator:
External Connector Type: Other
Port Type: USB
Handle 0x001A, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 3
n|US|iso8859-1
n|US|iso8859-1
r|CA|iso8859-1
Currently Installed Language: n|US|iso8859-1
Handle 0x001B, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 768 MB
Error Information Handle: Not Provided
Number Of Devices: 3
Handle 0x001C, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001B
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: 256 MB
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None
Handle 0x001D, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001B
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None
Handle 0x001E, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001B
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: A2
Bank Locator: Bank4/5
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None
Handle 0x001F, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0000FFFFFFF
Range Size: 256 MB
Physical Array Handle: 0x001B
Partition Width: 32
Handle 0x0020, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0000FFFFFFF
Range Size: 256 MB
Physical Device Handle: 0x001C
Memory Array Mapped Address Handle: 0x001F
Partition Row Position: 1
Handle 0x0021, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x0000FFFFC00
Ending Address: 0x0000FFFFFFF
Range Size: 1 kB
Physical Device Handle: 0x001D
Memory Array Mapped Address Handle: 0x001F
Partition Row Position: 1
Handle 0x0022, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x0000FFFFC00
Ending Address: 0x0000FFFFFFF
Range Size: 1 kB
Physical Device Handle: 0x001E
Memory Array Mapped Address Handle: 0x001F
Partition Row Position: 1
Handle 0x0023, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0024, DMI type 127, 4 bytes
End Of TableConfiguration: Windows Vista
Firefox 3.0.1
